Agro-Industrial Wastewater Treatment with Decentralized Biological Treatment Methods

Food processing consumes high volumes of water, making agro-industries the third biggest industrial user of water after oil refineries, primary metals and chemicals industries [...

Biotreatment of Winery Wastewater Using a Hybrid System Combining Biological Trickling Filters and Constructed Wetlands

The objective of this work was to determine the ability of a pilot-scale hybrid system to treat real (non-synthetic) winery wastewater. The experimental treatment system consisted of two stages: An attached growth pilot-scale bioreactor (biological trickling filter with plastic support material) was initially used to remove a significant amount of dissolved chemical oxygen demand (d-COD) from winery wastewater, and then a pilot-scale, horizontal subsurface flow constructed wetland (CW) was examined as a post-treatment step for further d-COD removal. Results from the biofilter revealed that the recirculation rate of 1.0 L/min lead to higher d-COD removal rates than that of 0.5 L/min for all feed d-COD concentrations tested (3500, 7500, 9000 and 18,000 mg d-COD/L). Experiments in the CW were performed using feed d-COD concentrations of about 1500 mg/L (equivalent to biofilter effluent when initial filter feed d-COD concentrations are 18,000 mg/L). The wetland polishing stage managed to further remove d-COD and produced effluent concentrations below current legislation limits for safe disposal. Furthermore, the presence of zeolite in CW (one third of the length of CW) enhanced ammonium removal. The experimental results indicate that the combination of a biological trickling filter and a constructed wetland could effectively treat effluents originating from small wineries typical of the Mediterranean region

Mechanisms of Individual and Simultaneous Adsorption of Antibiotics and Dyes onto Halloysite Nanoclay and Regeneration of Saturated Adsorbent via Cold Plasma Bubbling

Halloysite nanoclay (HNC) was examined as an adsorbent for the individual and simultaneous removal of antibiotic enrofloxacin (ENRO) and methylene blue (MB) from aqueous solutions, alongside its regeneration via cold atmospheric plasma (CAP) bubbling. Initially, batch kinetics and isotherm studies were carried out, while the effect of several parameters was evaluated. Both ENRO and MB adsorption onto HNC was better described by Langmuir model, with its maximum adsorption capacity being 34.80 and 27.66 mg/g, respectively. A Pseudo-second order model fitted the experimental data satisfactorily, suggesting chemisorption (through electrostatic interactions) as the prevailing adsorption mechanism, whereas adsorption was also controlled by film diffusion. In the binary system, the presence of MB seemed to act antagonistically to the adsorption of ENRO. The saturated adsorbent was regenerated inside a CAP microbubble reactor and its adsorption capacity was re-tested by applying new adsorption cycles. CAP bubbling was able to efficiently regenerate saturated HNC with low energy requirements (16.67 Wh/g-adsorbent) in contrast to Fenton oxidation. Most importantly, the enhanced adsorption capacity of the CAP-regenerated HNC (compared to raw HNC), when applied in new adsorption cycles, indicated its activation during the regeneration process. The present study provides a green, sustainable and highly effective alternative for water remediation where pharmaceutical and dyes co-exist

A Cyanobacteria-Based Biofilm System for Advanced Brewery Wastewater Treatment

Algal/cyanobacterial biofilm photobioreactors provide an alternative technology to conventional photosynthetic systems for wastewater treatment based on high biomass production and easy biomass harvesting at low cost. This study introduces a novel cyanobacteria-based biofilm photobioreactor and assesses its performance in post-treatment of brewery wastewater and biomass production. Two different supporting materials (glass/polyurethane) were tested to investigate the effect of surface hydrophobicity on biomass attachment and overall reactor performance. The reactor exhibited high removal efficiency (over 65%) of the wastewater’s pollutants (chemical oxygen demand, nitrate, nitrite, ammonium, orthophosphate, and total Kjeldahl nitrogen), while biomass per reactor surface reached 13.1 and 12.8 g·m−2 corresponding to 406 and 392 mg·L−1 for glass and polyurethane, respectively, after 15 days of cultivation. The hydrophilic glass surface favored initial biomass adhesion, although eventually both materials yielded complete biomass attachment, highlighting that cell-to-cell interactions are the dominant adhesion mechanism in mature biofilms. It was also found that the biofilm accumulated up to 61% of its dry weight in carbohydrates at the end of cultivation, thus making the produced biomass a suitable feedstock for bioethanol production

Utilization of Biomass Derived from Cyanobacteria-Based Agro-Industrial Wastewater Treatment and Raisin Residue Extract for Bioethanol Production

Biofuels produced from photosynthetic microorganisms such as microalgae and cyanobacteria could potentially replace fossil fuels as they offer several advantages over fuels produced from lignocellulosic biomass. In this study, energy production potential in the form of bioethanol was examined using different biomasses derived from the growth of a cyanobacteria-based microbial consortium on a chemical medium and on agro-industrial wastewaters (i.e., dairy wastewater, winery wastewater and mixed winery–raisin effluent) supplemented with a raisin residue extract. The possibility of recovering fermentable sugars from a microbial biomass dominated by the filamentous cyanobacterium Leptolynbgya sp. was demonstrated. Of the different acid hydrolysis conditions tested, the best results were obtained with sulfuric acid 2.5 N for 120 min using dried biomass from dairy wastewater and mixed winery–raisin wastewaters. After optimizing sugar release from the microbial biomass by applying acid hydrolysis, alcoholic fermentation was performed using the yeast Saccharomyces cerevisiae. Raisin residue extract was added to the treated biomass broth in all experiments to enhance ethanol production. Results showed that up to 85.9% of the theoretical ethanol yield was achieved, indicating the potential use of cyanobacteria-based biomass in combination with a raisin residue extract as feedstock for bioethanol production

Evaluation of the Antimicrobial Protection of Pharmaceutical Kaolin and Talc Modified with Copper and Zinc

Six pharmaceutical pastes were prepared using chemically modified kaolin and talc powders. Tests were conducted to determine their structural and chemical characteristics as well as their antimicrobial protection, thus rendering them suitable for cosmetic and pharmaceutical uses. Kaolin and talc were treated chemically via the cation exchange method to load the clay particles with copper and zinc ions, two cations well known for their antimicrobial properties. Mineralogical analyses were conducted by using X-ray diffraction (XRD) before and after the modification, confirming the mineralogical purity of the samples. Scanning electron microscopy was also used in conjunction with energy dispersed spectroscopy (SEM-EDS) to obtain chemical mapping images, revealing the dispersion of the added metals upon the clay minerals surfaces. Moreover, chemical analysis has been performed (XRF) to validate the enrichment of the clays with each metal utilizing the cation exchange capacity. All modified samples showed the expected elevated concentration in copper or zinc in comparison to their unmodified versions. From the X-ray photoelectron spectroscopy (XPS), the chemical state of the samples’ surfaces was investigated, revealing the presence of salt compounds and indicating the oxidation state of adsorbed metals. Finally, the resistance of pastes in microbial growth when challenged with bacteria, molds, and yeasts was assessed. The evaluation is based on the European Pharmacopeia (EP) criteria

Laboratory- and Pilot-Scale Cultivation of <i>Tetraselmis striata</i> to Produce Valuable Metabolic Compounds

Marine microalgae are considered an important feedstock of multiple valuable metabolic compounds of high biotechnological potential. In this work, the marine microalga Tetraselmis striata was cultivated in different scaled photobioreactors (PBRs). Initially, experiments were performed using two different growth substrates (a modified F/2 and the commercial fertilizer Nutri-Leaf (30% TN—10% P—10% K)) to identify the most efficient and low-cost growth medium. These experiments took place in 4 L glass aquariums at the laboratory scale and in a 9 L vertical tubular pilot column. Enhanced biomass productivities (up to 83.2 mg L−1 d−1) and improved biomass composition (up to 41.8% d.w. proteins, 18.7% d.w. carbohydrates, 25.7% d.w. lipids and 4.2% d.w. total chlorophylls) were found when the fertilizer was used. Pilot-scale experiments were then performed using Nutri-Leaf as a growth medium in different PBRs: (a) a paddle wheel, open, raceway pond of 40 L, and (b) a disposable polyethylene (plastic) bag of 280 L working volume. Biomass growth and composition were also monitored at the pilot scale, showing that high-quality biomass can be produced, with important lipids (up to 27.6% d.w.), protein (up to 45.3% d.w.), carbohydrate (up to 15.5% d.w.) and pigment contents (up to 4.2% d.w. total chlorophylls), and high percentages of eicosapentaenoic acid (EPA). The research revealed that the strain successfully escalated in larger volumes and the biochemical composition of its biomass presents high commercial interest and could potentially be used as a feed ingredient

Simultaneous Treatment of Agro-Industrial and Industrial Wastewaters: Case Studies of Cr(VI)/Second Cheese Whey and Cr(VI)/Winery Effluents

Hexavalent chromium (Cr(VI)) was co-treated either with second cheese whey (SCW) or winery effluents (WE) using pilot-scale biological trickling filters in series under different operating conditions. Two pilot-scale filters in series using plastic support media were used in each case. The first filter (i.e., Cr-SCW-filter or Cr-WE-filter) aimed at Cr(VI) reduction and the partial removal of dissolved chemical oxygen demand (d-COD) from SCW or WE and was inoculated with indigenous microorganisms originating from industrial sludge. The second filter in series (i.e., SCW-filter or WE-filter) aimed at further d-COD removal and was inoculated with indigenous microorganisms that were isolated from SCW or WE. Various Cr(VI) (5–100 mg L−1) and SCW or WE (d-COD, 1000–25,000 mg L−1) feed concentrations were tested. Based on the experimental results, the sequencing batch reactor operating mode with recirculation of 0.5 L min−1 proved very efficient since it led to complete Cr(VI) reduction in the first filter in series and achieved high Cr(VI) reduction rates (up to 36 and 43 mg L−1 d−1, for SCW and WW, respectively). Percentage d-COD removal for SCW and WE in the first filter was rather low, ranging from 14 to 42.5% and from 4 to 29% in the Cr-SCW-filter and Cr-WE-filter, respectively. However, the addition of the second filter in series enhanced total d-COD removal to above 97% and 90.5% for SCW and WE, respectively. The above results indicate that agro-industrial wastewater could be used as a carbon source for Cr(VI) reduction, while the use of two trickling filters in series could effectively treat both industrial and agro-industrial wastewaters with very low installation and operational costs

Cultivation of Arthrospira platensis in Brewery Wastewater

Cultivation of photosynthetic microorganisms in wastewater is a potential cost-effective method of treating wastewater and simultaneously providing the essential nutrients for high-value biomass production. This study investigates the cultivation of the cyanobacterium Arthrospira platensis in non-diluted and non-pretreated brewery wastewater under non-sterile and alkaline growth conditions. The system’s performance in terms of biomass productivity, pollutant consumption, pigment production and biomass composition was evaluated under different media formulations (i.e., addition of sodium chloride and/or bicarbonate) and different irradiation conditions (i.e., continuous illumination and 16:8 light:dark photoperiod). It was observed that the combination of sodium bicarbonate with sodium chloride resulted in maximum pigment production recorded at the end of the experiments, and the use of the photoperiod led to increased pollutant removal (up to 90% of initial concentrations) and biomass concentration (950 mg/L). The composition of the microbial communities established during the experiments was also determined. It was observed that heterotrophic bacteria dominated by the phyla of Pseudomonadota, Bacillota, and Bacteroidota prevailed, while the cyanobacteria population showcased a dynamic behavior throughout the experiments, as it increased towards the end of cultivation (relative abundance of 10% and 30% under continuous illumination and photoperiod application, respectively). Overall, Arthrospira platensis-based cultivation proved to be an effective method of brewery wastewater treatment, although the large numbers of heterotrophic bacteria limit the usage of the produced biomass to applications such as biofuel and biofertilizer production

Laboratory- and Pilot-Scale Cultivation of Tetraselmis striata to Produce Valuable Metabolic Compounds

Marine microalgae are considered an important feedstock of multiple valuable metabolic compounds of high biotechnological potential. In this work, the marine microalga Tetraselmis striata was cultivated in different scaled photobioreactors (PBRs). Initially, experiments were performed using two different growth substrates (a modified F/2 and the commercial fertilizer Nutri-Leaf (30% TN&mdash;10% P&mdash;10% K)) to identify the most efficient and low-cost growth medium. These experiments took place in 4 L glass aquariums at the laboratory scale and in a 9 L vertical tubular pilot column. Enhanced biomass productivities (up to 83.2 mg L&minus;1 d&minus;1) and improved biomass composition (up to 41.8% d.w. proteins, 18.7% d.w. carbohydrates, 25.7% d.w. lipids and 4.2% d.w. total chlorophylls) were found when the fertilizer was used. Pilot-scale experiments were then performed using Nutri-Leaf as a growth medium in different PBRs: (a) a paddle wheel, open, raceway pond of 40 L, and (b) a disposable polyethylene (plastic) bag of 280 L working volume. Biomass growth and composition were also monitored at the pilot scale, showing that high-quality biomass can be produced, with important lipids (up to 27.6% d.w.), protein (up to 45.3% d.w.), carbohydrate (up to 15.5% d.w.) and pigment contents (up to 4.2% d.w. total chlorophylls), and high percentages of eicosapentaenoic acid (EPA). The research revealed that the strain successfully escalated in larger volumes and the biochemical composition of its biomass presents high commercial interest and could potentially be used as a feed ingredient